Why? Why not, seeing the Ape and Turtle are liked I thought I'd have another go at creating a zoo.
After printing the support should snap of easy by twisting it and the snake is fully functional. There will be a little support left in the ball joints but this will fall out by playing with it.
It's a friendly snake that does't bite or strangle, and it's free!
I do appreciate feedback if you print it ;o)
I've included a file with support, that should work on more systems than my own. It cut's down printing time by a hour for me using these settings:
- Layer height of 0.15 mm
- Outer walls speed 60 mm/s, infill 75 mm/s
- Infill 25%, bottom and top at 0.6 mm and walls of 0.5 mm thick.
I advise to use a brim to keep the 23 parts on the build platform until they connect. I left the model without support on here so you can always create your own support if my method doesn't work for you.
* requires you to own a 3D printer.
|Dimensions||10.6 cm x 10.8 cm x 2.25 cm|
|Print volume||61.4 cm3|
Copyright © 2018 Threeate B.V.
All rights reserved. Payments are performed by Threeate B.V.